IMPORTANT “SAFETY WARNINGS” - NOTE THE SYMBOLTHESE SAFETY WARNINGS ARE FOR YOUR PROTECTION AS WELL AS THE SAFETY OF OTHERS. DISREGARDING INFORMATIO
8590® and 835® Unscrew the magazine cap by turning it counterclockwise.Models: Remove the barrel from the receiver with a gentle back-and-forth r
9Move the forearm/action slide assembly rearward so that the bolt assembly and bolt slide are three quarters of the way rearward. When the bottom of
10Remove the forearm/action slide assembly by sliding it forward and off the magazine tube.CAUTION: Field disassembly is now complete! The shotgun sho
11Assemble the elevator by squeezing the arms together sufficiently to position them in the receiver so that the buttons on the elevator t into the c
12TRIGGER HOUSING ASSEMBLY INSTALLATIONNOTE: Hammer must be in the fully-cocked position to allow the trigger housing to be inserted in the receiver
IF YOUR FIREARM DOES NOT PERFORM AS DESCRIBED IN ANY OF THE ABOVE STEPS, CONTACT THE FACTORY AUTHORIZED PRODUCT SERVICE CENTER IMMED
14MOSSBERG ACCESSORY BARRELSAccessory barrels are interchangeable only within specific model, gauge and magazine capacity.500® Models: HS410
15SPEEDFEED® STOCKBEFORE CLEANING OR REMOVING THE SPEEDFEED® STOCK: a. Move the safety button fully rearward to the “ON” (SAFE) position
162) Carefully remove front sight by turning it counterclockwise. Take precautions to insure you do not damage the barrel finish.3) Slide heat shi
To Change Removable Combs:1) Using a 3/16 inch Allen head wrench (supplied) unscrew and remove the comb retaining screw found at the top center of
As the owner of a firearm, you must undertake the full-time responsibility of safe firearms handling for your own safety and the safety of t
18CARE & CLEANING: The precision threads on your choke tube should be kept clean and lightly oiled at all times.During cleaning of the barrel, be
ACCU-MAG™ CHOKE TUBES(835 MODELS ONLY)ACCU-MAG choke tubes are internal, ush tting or extended choke tubes designed for use with LEAD or STEEL sho
ACCU-MAG™ ULTI-FULL™ TURKEY TUBEThe NATIONAL WILD TURKEY FEDERATION has determined that the average distance at which turkeys are most eff
SERVICE INSTRUCTIONSShould your firearm, or any component of your firearm require service, kindly ship your entire rearm (please do not
22MOSSBERG WARRANTY500®, 535™,590®and 835®MODEL SHOTGUNSTEN (10) YEAR LIMITED WARRANTYLimited Warranty: O.F. Mossberg & Sons, Inc. (“Mossberg”) wa
NOTES23
NOTES24
NOTES25
NOTES26
NOTES27
TABLE OF CONTENTS PageOperating Instructions ... 2Mechanical Sa
28ITEMNO. DESCRIPTION 1. Barrel assembly 2. Mid-point bead 3. Front sight 4. Takedown screw (model 500®/505™/535™) 5. Choke tube 6. Recei
29
30
OPERATING INSTRUCTIONSRead and understand this entire manual and its safety warnings before handling this firearm.MECHANICAL SAFETYThe safety button is
3BARREL ASSEMBLYBarrels are not interchangeable between model numbers, gauge or capacity. 500®, 505™, 535™, 590® and 835® barrels are interchangeable
4CAUTION: The magazine spring exerts pressure on the retainer. Use caution when disassembling. To disassemble: Pry up at various points around the
The firearm is now loaded and will fire if the safety is moved to the “OFF” (FIRE) position and the trigger is pulled. Keep the muzzle pointed in a saf
6Discharging firearms in poorly ventilated areas, cleaning firearms, or handling ammunition may result in exposure to lead and/or substances known to c
7UNLOADINGMove the safety button fully rearward to the “ON” (SAFE) position and keep the muzzle pointed in a safe direction while unloading the firear
Komentáře k této Příručce